T-M-16
RUMBLE STRIPE INSTALLATION LAYOUT
(Click image to open PDF)
Related Standard Drawings
| DRAWING | DESCRIPTION | REMARKS |
|---|---|---|
| MM-PM-2 |
SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANE OR ROUTES | FOR PAVEMENT MARKING AND SIGNING |
| T-M-1 | DETAILS OF PAVEMENT MARKINGS FOR CONVENTIONAL ROADS AND MARKING ABBREVIATIONS | FOR SPACING |
| T-M-15 | ASPHALT SHOULDER RUMBLE STRIP INSTALLATION DETAILS FOR INTERSTATE AND ACCESS CONTROLLED ROUTES | WHEN RUMBLE STRIPES ARE INSTALLED ON ACCESS CONTROLLED ROUTES, THE RUMBLE STRIPE IS TO BE INSTALLED CONTINUOUSLY WITHOUT THE 15’ GAP. RUMBLE STRIPE WIDTH SHALL BE 16" WIDE AS DETAILED |
| T-M-15A | ASPHALT SHOULDER RUMBLE STRIP INSTALLATION DETAILS FOR NON-ACCESS CONTROLLED RURAL ROUTES | FOR RUMBLE STRIP DETAILS |
| T-M-16A | ASPHALT CENTERLINE RUMBLE STRIPE | FOR MILLED-IN RUMBLE STRIPE DETAILS |
Related Item Numbers
| ITEM NO. | U/M | DESCRIPTION |
|---|---|---|
| 411-12.03 | L.M. | SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (8IN WIDTH) |
| 411-12.04 | L.M. | SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (4IN WIDTH) |
| 716-12.02 | L.M. | ENHANCED FLATLINE THERMOPLASTIC PAVEMENT MARKING (6 IN LINE) |
| 716-14.02 | L.M. | PROFILED THERMO PVMT MRKNG AUDIBLE (6IN) |
Archived Standard Drawings
| DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD ) |
|---|
| 12-01-2009 | 11-01-2011 | 12-01-2014 | 08-02-2018 | 06-28-2019 | 02-03-2020 | 03-04-2021 |
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
This Page Last Updated: July 12, 2024 at 11:37 AM