RD18-RTS-3

STANDARD CONSTRUCTION DETAILS FOR ROUNDABOUTS
RD18-RTS-3

(Click image to open PDF)

Latest Revision Note

XX/XX/20XX    NEW STANDARD DRAWINGS

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-CR SERIES MULTIMODAL → CURB RAMP FOR DETAILS
MM-CR-1 DETECTABLE WARNING SURFACE PLACEMENT ON CURB RAMPS FOR DETAILS
MM-CR-4 PEDESTRIAN REFUGE FOR ADDITIONAL DETAILS OF MEDIAN CROSSINGS
MM-PM SERIES MULTIMODAL → PAVEMENT MARKING FOR SIGNING AND PAVEMENT MARKINGS FOR SHARED USE PATHS AND BICYCLE LANES.
MM-SW SERIES MULTIMODAL → SIDEWALK FOR ADDITIONAL DETAILS
MM-TS-SERIES MULTIMODAL → TYPICAL SECTION FOR ADDITIONAL DETAILS
RP-SC-1 SLOPING CONCRETE CURB AND CURB AND GUTTER FOR SLOPING CURB
RP-VC-10 VERTICAL CONCRETE CURBS AND CURB AND GUTTER (FOR 8" TO 12" GUTTER DEPTH) FOR 6" DETACHED CONCRETE CURB
T-S-25 SIGNING PLAN DETAILS FOR ROUNDABOUTS FOR SIGNING DETAILS FOR ROUNDABOUTS
T-M-4A STANDARD UNSIGNALIZED MID-BLOCK CROSSING FOR DETAILS
T-M-17 PAVEMENT MARKING DETAILS FOR ROUNDABOUTS FOR PAVEMENT MARKING DETAILS FOR ROUNDABOUTS

Related Item Numbers

ITEM NO. U/M DESCRIPTION
604-01.01 C.Y. CLASS A CONCRETE (ROADWAY)
701-01.01 S.F. CONCRETE SIDEWALK (4 ")
701-01.02 S.F. CONCRETE SIDEWALK (6 ")
702-01 C.Y. CONCRETE CURB
702-03 C.Y. CONCRETE COMBINED CURB & GUTTER

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
05-04-2022
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402

This Page Last Updated: July 18, 2022 at 7:45 AM