RD18-RTS-2

DESIGN STANDARDS FOR MULTI-LANE URBAN AND RURAL ROUNDABOUTS
RD18-RTS-2

(Click image to open PDF)

Latest Revision Note

XX/XX/20XX    NEW STANDARD DRAWINGS

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-PM SERIES MULTIMODAL → PAVEMENT MARKING FOR SIGNING AND PAVEMENT MARKINGS FOR SHARED USE PATHS AND BICYCLE LANES.
MM-SW SERIES MULTIMODAL → SIDEWALK FOR ADDITIONAL DETAILS
MM-TS SERIES MULTIMODAL → TYPICAL SECTION FOR ADDITIONAL DETAILS
RD18-RSD-1 SIGHT DISTANCE FOR URBAN AND RURAL ROUNDABOUTS FOR SIGHT DISTANCE FOR SINGLE-LANE AND MULTI LANE ROUNDABOUTS
RD18-RTS-1 DESIGN STANDARDS FOR SINGLE LANE URBAN AND RURAL ROUNDABOUTS FOR DESIGN STANDARDS FOR SINGLE-LANE ROUNDABOUTS
RD18-RTS-3 STANDARD CONSTRUCTION DETAILS FOR ROUNDABOUTS FOR STANDARDS CONSTRUCTION DETAILS FOR ROUNDABOUTS
RP-SC-1 SLOPING CONCRETE CURB AND CURB AND GUTTER FOR SLOPING CURB BETWEEN CIRCULATORY ROADWAY AND TRUCK APRON
RP-VC-10 VERTICAL CONCRETE CURBS AND CURB AND GUTTER (FOR 8" TO 12" GUTTER DEPTH) FOR DETACHED CONCRETE CURB BETWEEN TRUCK APRON AND CENTRAL ISLAND
T-M-17 PAVEMENT MARKING DETAILS FOR ROUNDABOUTS FOR PAVEMENT MARKING DETAILS FOR ROUNDABOUTS
T-S-25 SIGNING PLAN DETAILS FOR ROUNDABOUTS FOR SIGNING DETAILS FOR ROUNDABOUTS

Related Item Numbers

ITEM NO. U/M DESCRIPTION
     
     
     

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
05-04-2022
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402

This Page Last Updated: July 18, 2022 at 7:46 AM