RD11-TS-10

DESIGN STANDARDS FOR MULTI-LANE URBAN AND RURAL ROUNDABOUTS
RD11-TS-10

(Click image to open PDF)

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-CR-4 PEDESTRIAN REFUGE FOR ADDITIONAL DETAILS
MM-PM-1 SIGNING AND PAVEMENT MARKINGS AT INTERSECTION CROSSING FOR SHARED-USE PATHS FOR SIGNING AND PAVEMENT MARKINGS FOR SHARED USE PATHS AND BICYCLE LANES
MM-PM-2 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LAND OR ROUTES FOR SIGNING AND PAVEMENT MARKINGS FOR SHARED USE PATHS AND BICYCLE LANES
MM-PM-3 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES ON URBAN ROADWAYS FOR SIGNING AND PAVEMENT MARKINGS FOR SHARED USE PATHS AND BICYCLE LANES
RD11-SD-1 THRU RD11-SD-7 SEPARATED SHARED USE PATH TYPICAL SECTIONS FOR ADDITIONAL DETAILS
MM-TS-3 RD11 INTERSECTION SIGHT DISTANCE FOR ADDITIONAL GUIDANCE
RD11-TS-9 DESIGN STANDARDS FOR SINGLE LANE URBAN AND RURAL ROUNDABOUTS FOR MULTI-LANE DESIGNS
RP-R-2 STANDARD CONSTRUCTION DETAILS FOR ROUNDABOUTS FOR SLOPING CURB BETWEEN CIRCULATORY ROADWAY AND TRUCK APRON
RP-VC-10 VERTICAL CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR VERTICAL CURB BETWEEN TRUCK APRON AND CENTRAL ISLAND
T-M-17 PAVEMENT MARKING DETAILS FOR ROUNDABOUTS FOR MARKING DETAILS

Related Item Numbers

ITEM NO. U/M DESCRIPTION REMARKS
       
       
       

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
01-01-2019

If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: July 12, 2024 at 11:27 AM